The products of our Design A Sign night.

A few years ago, Paint Nite infiltrated Edmonton’s night life. Taking over bars across the city almost every day, it was a great way to dip one’s toes into the creative realm while hanging out with a friend or two. Combine that with drinks or food, and it was a pretty perfect evening, if I do say so myself.

I was obsessed with Paint Nite, wanting to sign up for one after another. In fact, I enjoyed the practice so much that I ended up purchasing my own portable easel, canvases, brushes, and acrylics so that I could work on art outside of those occasions, too.

Even owning all of the materials needed to do the same thing in the comfort of my home, I still attend them every so often. Simply put, it’s a fun time. As the Paint Nite brand has expanded, so have their event offerings.

I have previously tried Plant Nite (terrarium building) twice. While I always leave hopeful that my miniature gardens will survive, sadly, I’ve come to the realization that I’m probably not meant to be a plant mom. I just do not have a green thumb at this point in my life and I can’t continue to spend the money on something that will ultimately die.

Alas, the makers of Paint Nite introduced Design A Sign locally sometime last fall. It’s not exactly game changing or anything. There are already a few other businesses that run similar types of parties, but they tend to charge between $70 to $100 per person. Paint Nite is $65 plus tax each, including the $20 material charge. They also regularly offer discounts through their website, so it’s easy to participate for less than that. If you can’t find a discount directly from them, purchase a Paint Nite Groupon. Although they state that they’re for Paint or Plant Nite, I’ve tested it and the voucher is applicable towards the total cost of Design A Sign when redeeming.

Kirk and I went to a Design A Sign night with another friend in December. It took place at Sixty 6 Bar N’ Grill inside Londonderry Mall. It seems like all of their upcoming events are happening at the same location (hopefully they’ll expand to other area around Edmonton as this is quite out of the way for us).

Waiting to get started with our stencils and wood.

We arrived early to get some food before things officially launched. The host saw us and asked if we were there for Design A Sign. When we said yes, she allowed us to pick out our pieces of wood and to save spots at one of the prepared tables. I guess for this particular event, the place where they had purchased the wood had made a mistake with sawing the pieces as some were a tad shorter than they should have been, but we got to choose first, so it wasn’t an issue for us. The cuts we selected were technically stained, too, so they already had a nice tint to them.

Once we settled in for Design A Sign, we each had to join our two slabs of wood together using flat metal braces, screws, and an electric screwdriver on the backside. We also received tiny screws and a little hanger to attach. When that was done, we flipped our now larger boards over to work on the front.

My cup of silver stain.

Waiting for my stained wood to dry.

We were instructed to select a colour of paint from the many options available. I filled a small 1.5″ diameter cup with a few millimeters of acrylic and then I topped off the cup with water. Stirred together, it created a wash that I applied with cloths to the wood. The makeshift stain worked quite well, especially when using darker colours. I chose a silver paint that was much more subtle, leaving a nice shimmery sheen visible when the light hits the wood just right.

Removing the bubbles from the stencil.

Peeling away the top layer to reveal the stencil underneath.

When the base dried, I then took my stencil (selected in advance when purchasing my ticket online; there are dozens of different signs to choose from) and peeled the paper backing from them. It left an adhesive that allowed the stencil to stick to the wood. Any card I could find was then used to push out the air bubbles. TIP: Upon pulling the paper backing from the stencil, try to keep the full stencil together. Don’t allow the cutouts to come up with it. By ensuring that it’s in one piece, it’ll make things much easier later.

With the stencil now attached to the wood, I could then peel off the cutouts to reveal the design. Do a thorough once over to make sure that all of the parts that should be taken away are gone. Since I had chosen a saying, it took me a while to get mine ready. The text was the most difficult part to work with because I had to make sure the center of letters like an ‘a’ or an ‘o’ didn’t go missing. Finally, with the necessary areas of wood completely exposed, I began to paint.

Metallic gold and silver stars are highlights of my sign.

The final colour scheme of my sign.

The paints were awesome as they dried quite quickly, blended well, and were great for layering. We also had a number of different paint applicators at our disposal (the white makeup sponges were the best). I used an ombre technique, so the colours of the font faded from one shade to another. I went for touches of metallic throughout as well.

Once the paint dried, I removed the majority of the stencil.

Then, I carefully took away any parts of the stencil that remained.

When I felt satisfied with my work, I waited a bit longer for the paint to truly dry (our host also had a fan set up for people to use, if they were impatient about the drying process). Then, I went for it. I lifted a corner of the adhered stencil and peeled. TIP: Be careful when you do this though. I didn’t realize I was pulling it off going with the grain of the wood, and the stencil ended up lifting up slivers of wood with it, meaning there are spots of my sign with lines and no stain. It’s not super noticeable, but I know those flaws are there. As soon as I figured that out, I switched to peeling from an opposite corner and I was much more successful. No more wood came off.

From start to finish the whole activity took about three hours. The three of us had an excellent time and I was itching to register for another Design A Sign event right away. It’s a chance for anyone to express their inner artist without the pressure. I find these nights to be really relaxing and just enough out of the ordinary to make it feel like something special.